Skip to content

AtomOD12P 4G Outdoor CPE

AtomOD12P-4
AtomOD12P-3
AtomOD12P-1

AtomOD12P 4G Outdoor CPE

The Product is a high performance LTE CAT12 CPE that provides a capabilities to an user accessing the Internet through Baicells Simple Network Access Point (SNAP) Power over Ethernet (PoE) router.

By easy-steps operation, the CPE can connect to BaiOMC system for centralized control and monitor. The product comes with a standard one-year warranty; 

An extended warranty is available.

 

AtomOD12P-EG8055P-M26 4G Outdoor CPE DataSheet

Download

NOTE: Features can vary based on model or region.

  • support LTE Band 1/3/5/7/8/20/28/32/38/40/41/42/43
  • Complies with 3GPP Release 11 CAT12 standards
  • 1000 Mbps Ethernet interface
  • Peak data rate of up to 600Mbps
  • GUI-based local and remote Web management
  • Supports TR069 network management protocol
  • User-friendly LED status indicators
  • Power supply with PoE
  • Pole or wall mounted
  • Transparent bridge mode

LTE Standard

3GPP Release11, CAT12

LTE Mode

TDD

Channel Bandwidth

SC: 5/10/15/20 MHz

CA: 60 MHz as maximum aggregated bandwidth

Frequency Bands

LTE-FDD: B1/3/5/7/8/20/28/32 LTE-TDD:B38/40/41/42/43

Multiplexing

DL2x2 MIMO

Security

Firewall: IP/MAC/URL filter; ACL rule

Ethernet Interfaced

1 RJ-45 port 10/100/1000 auto-sensing, auto-MDX, PoE

Protocols Used

IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR069, TR104

Network Management

Web GUI, ACS, OMC, SNMP

VLAN

802.IQ/VxLAN/NGMWAN

Peak Rate

FDD: DL 600Mbps @ 3CC CA, UL 150Mbps @ 2CC CA

TDD: DL 410Mbps @ 3CC CA, UL 28Mbps (2:7) @ 2CC CA

Modulation

DL: QPSK, 16QAM, 64QAM, 256QAM

UL: QPSK, 16QAM, 64QAM

Tx Power

23±2dBm

Receive Sensitivity

<-94 dBm @ QPSK, 20 MHz, 25°C

Network Mode

NAT or Bridge

VPN

L2TP L2/L3, GRE L2/L3, NGMWAN

NAT

Port forwarding, port trigger, DMZ, ALG

Diagnostics

TCP dump, ping, traceroute

Statistics

LTE status; connection/system up time; device status; DHCP client list; Wi-Fi station list; firewall status

Maintenance

Date and time setting; reboot; restore factory settings; restore or back up configuration file; firmware upgrade locally or OTA

IP Protection Rating

IP65

LED Indicators

4 LED Indicators

Restore Button

Press for 10 seconds to restore the CPE to its factory settings

Temperature

Ÿ   Operating Temperature: -40°F to 131°F / -40°C to 55°C

Ÿ   Storage Temperature: -40°F to 158°F / -40°C to 70°C

Humidity

5%~95%

Power Consumption

<18 W

Power Supply

With PoE Adaptor:

Ÿ   INPUT 100-240VAC

Ÿ   OUTPUT 24VDC 1A