Skip to content

SNAP PoE EP3011

PoE Router
PoE Router -3
PoE Router -1

SNAP PoE EP3011

The Baicells Simple Network Access Point (SNAP) Power over Ethernet (PoE) router is an on-premise Wi-Fi access point that provides comprehensive routing capabilities to multiple users accessing the Internet through Baicells outdoor user equipment (UE). The router provides PoE power to an outdoor UE through the Ethernet connection, thus eliminating the need for a separate power connection and adaptor for the UE.

Wi-Fi signals from user devices such as mobile phones, laptops, and tablets pass through the SNAP router and are forwarded to the outdoor UE where the Wi-Fi signals are changed to Long-Term Evolution (LTE) signals and sent on to the high-speed LTE network.

The SNAP router supports 2.4 GHz and 5 GHz Wi-Fi, may be used with the Atom Outdoor Low-Gain or Atom Outdoor High-Gain UE, and is managed through the operations and maintenance center (OMC).

The product comes with a standard one-year warranty; an extended warranty is available.

SNAP PoE EP3011 DataSheet

Download

NOTE: Features can vary based on model or region.

  • Standard IEEE 802.11b/g/n/ac Wi-Fi operating in dual-band (2.4 GHz and 5 GHz) mode
  • 1000 Mbps WAN with PoE output
  • 1000 Mbps LAN port
  • Support OMC management app support
  • Supports TR069 network management protocol
  • User-friendly LED status indicators

Standard

IEEE 802.11 b/g/n/ac

Channel Bandwidth

20/40/80 MHz

Frequency

2.4 GHz and 5 GHz dual-band

MIMO

2x2

Peak Rate

802.11b: 11 Mbps

802.11g: 54 Mbps

802.11n: 300Mbps

802.11ac: 866Mbps

Modulation

DSSS/CCK, OFDM

Receive Sensitivity

-64 dBm @ 65 Mbps, typical for 802.11n/ac

-65 dBm @ 54 Mbps, typical for 802.11g

-76 dBm @ 11 Mbps, typical for 802.11b

Max Output Power

14±3 dBm

Antenna Type

Internal omni, 2T2R

Antenna Gain

3 to 5 dBi

Active Users

32

WAN Port

1 RJ-45 port 10/100/1000 auto-sensing, auto-MDX

LAN Port

2 RJ-45 port 10/100/1000 auto-sensing, auto-MDX

Protocols Used

IPv4/IPV6, UDP, TCP, IP, ICMP, HTTPS, SSH, TELNET, TR069

Network Management

Web GUI, ACS, OMC

VLAN

802.1Q

Network Mode

NAT

WLAN

MSSID isolation

VPN

L2TP, GRE, PPTP, L2 VxLAN, OpenVPN

NAT

Port forwarding, DMZ, ALG

Diagnostics

TCP dump, ping, trace route

Statistics

Ÿ   LTE status

Ÿ   Connection, system up time

Ÿ   Device status

Ÿ   DHCP client list

Ÿ   Wi-Fi station list

Ÿ   Firewall status

Maintenance

Ÿ   Date and time setting

Ÿ   Reboot

Ÿ   Restore factory settings

Ÿ   Restore/back up config files

Ÿ   Firmware upgrade locally or OTA

LED Indicators

Power, WLAN, SYS, LTE Signal

Power Switch

On/Off

Restore Button

Press for 10 seconds to restore the CPE to its factory settings

Temperature

Ÿ   Operating Temperature: 14°F to 113°F /-10°C to 45°C

Ÿ   Storage Temperature: -4°F to 158°F / -20°C to 70°C

Humidity

5%~95%

Power Consumption

< 10W

PSE Capability

Support Passive PSE (1,2 +;3,6 -or 4,5 +;7, 8-) 24VDC 0.5A

Power Supply

DC Adaptor:

Ÿ   INPUT 100-240VAC

Ÿ   OUTPUT 12VDC 1A

Weight

About 11.4oz / 323g

Dimensions

6.9 x 5.8 x 7.2 inches / 174 x 147 x 182 millimeters