Nova442i_TDD
Nova442i_TDD Outdoor Base Station
The Baicells Nova442i is an advanced two-carrier outdoor eNodeB (eNB) compliant with 3GPP LTE TDD technology. This 4x4W eNB operates in Carrier Aggregation (CA) mode or Dual Carrier (DC) mode.
In CA mode, Nova442i supports 2CC (2 component carriers) DL/UL CA. 2CC DL/UL CA doubles DL/UL peak throughput comparing to that of a single carrier. By aggregating 2 separated spectrum resources into a virtual contiguous spectrum resource. In DC mode, each carrier is treated as an independent cell, supporting 96+96 users, with each cell supporting 5, 10, 15, or 20 MHz bandwidth. Using a Nova442i in DC mode simplifies and streamlines the deployment of split sectors.
In addition, HaloB (an embedded EPC option) is available on the Nova442i as part of the base software. The Baicells patented HaloB solution migrates the necessary core network functions to the eNB.
This product comes with a standard one-year warranty; an extended warranty is available.
Nova442i_TDD Outdoor Base Station Datasheet
DownloadNOTE: Features can vary based on model or region.
- Standard LTE TDD Bands 40/48
- GUI-based local and remote Web management
- Excellent Non-Line-of-Sight (NLOS) coverage
- Peak rate: Up to DL 290Mbps and UL 70Mbps with 2x20MHz bandwidth
- 2CC DL/UL CA improves the spectrum efficiency of fragmented spectrum resources.
- Suitable for private and public deployments; any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
- 128 RRC connected users per carrier (128+128 in DC mode); upgradeable to higher capacity in future releases
- Built-in RF antenna and GPS antenna
- Integrated small cell form factor for quick and easy installation
- Configured out of the box to work with Baicells Cloud Core
- HaloB as embedded EPC solution
- Supports Transparent Bridge Mode
- Supports Citizens Broadband Radio Service (CBRS)
- Plug-and-play with Self-Organizing Network (SON) capabilities
- Inter operation with all standard LTE Evolved Packet Core (EPC)
- Supports TR-069 network management interface
- Lower power consumption, which reduces OPEX, can be powered easily by Baicells compact outdoor smart UPS
Standard |
LTE TDD RAN (3GPP R15 compliant) |
TDD UL/DL Configuration |
1, 2, 6 (with Special Subframe Configuration 7) |
Frequency Band |
Band40 (2300 MHz – 2400 MHz) Band48 (3550 MHz – 3700 MHz) |
Channel Bandwidth |
SC: 5/10/15/20 MHz CA: 40 MHz as maximum aggregated bandwidth |
Multiplexing |
MIMO: 2x2 (DL) |
Security |
Radio: SNOW 3G/AES-128 |
Ethernet Interface |
1 RJ-45 Ethernet interface (1 GE) |
Power Supply |
PoE++, IEEE 802.3bt standard |
Protocols Used |
IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP |
Network Management |
IPv4/IPv6, HTTP/HTTPs, SNMPv2c, TR-069, SSH, Embedded EPC |
VLAN/VxLAN |
802.IQ/VxLAN |
LED Indicators |
4 x status LED CELL1/CELL2/ALM/PWR |
Peak Data Rate (DC) |
2x20 MHz |
DL (Mbps) |
UL (Mbps) |
UL/DL Config 1 |
2x105 |
2x28 |
|
UL/DL Config 2 |
2x145 |
2x14 |
|
UL/DL Config 6 |
2x85 |
2x35 |
|
2x10 MHz |
DL (Mbps) |
UL (Mbps) |
|
UL/DL Config 1 |
2x51 |
2x14 |
|
UL/DL Config 2 |
2x70 |
2x7 |
|
UL/DL Config 6 |
2x42 |
2x17 |
|
Peak Data Rate (CA) |
2x20 MHz |
DL (Mbps) |
UL (Mbps) |
UL/DL Config 1 |
210 |
56 |
|
UL/DL Config 2 |
290 |
28 |
|
UL/DL Config 6 |
170 |
70 |
|
2x10 MHz |
DL (Mbps) |
UL (Mbps) |
|
UL/DL Config 1 |
102 |
28 |
|
UL/DL Config 2 |
140 |
14 |
|
UL/DL Config 6 |
84 |
34 |
|
20MHz + 10MHz |
DL (Mbps) |
UL (Mbps) |
|
UL/DL Config 1 |
156 |
42 |
|
UL/DL Config 2 |
215 |
21 |
|
UL/DL Config 6 |
127 |
52 |
|
20MHz + 15MHz |
DL (Mbps) |
UL (Mbps) |
|
UL/DL Config 1 |
182 |
49 |
|
UL/DL Config 2 |
250 |
24 |
|
UL/DL Config 6 |
148 |
61 |
|
User Capacity |
Up to 128 RRC connected users per cell (4 users per TTI) SC/CA: 128 RRC connected users DC: 128+128 RRC connected users |
||
Maximum Deployment Range |
12 kilometers |
||
Latency |
30 milliseconds |
||
Receive Sensitivity |
-100 dBm (per channel) |
||
Modulation |
MCS0 (QPSK) to MCS27 (256QAM) DL: QPSK, 16QAM, 64QAM, 256QAM UL: QPSK, 16QAM, 64QAM |
||
Transmit Power Range |
0 to 36 dBm per channel (combined +42dBm, configurable) (1 dB interval) |
||
Quality of Service |
Nine-level priority indicated by QoS Class Identifiers (QCI) |
||
ARQ/HARQ |
Supported |
||
Synchronization |
GPS, 1588v2 |
Voice |
VoLTE* |
NSA |
Supported |
SON |
Self-Organizing Network Automatic setup Automatic Neighbor Relation (ANR) PCI confliction detection |
EPC |
HaloB (Embedded EPC) |
Traffic Offload |
Local breakout |
Layer 2 Support |
Transparent Bridge Mode |
Maintenance |
Local/Remote Web maintenance Online status management Performance statistics Fault management Local/Remote software upgrade Logging Connectivity diagnosis Automatic start and configuration Alarm reporting User information tracing Signaling trace |
Surge Suppression |
Yes |
Power Interface Lightning Protection |
Differential mode: ±10 KA |
MTBF |
≥ 150000 hours |
MTTR |
≤ 1 hour |
Ingress Protection Rating |
IP65 |
Operating Temperature |
-40°F to 131°F / -40°C to 55°C |
Storage Temperature |
-49°F to 158°F / -45°C to 70°C |
Humidity |
5% to 95% RH |
Atmospheric Pressure |
70 kPa to 106 kPa |
Power Consumption |
Typical 70W, maximum 90W |
Weight |
23.8 lbs / 10.8 kg |
Dimensions (HxWxD) |
Diameter: 7.9 inches/200mm Height: with lightning rod: 33.7 inches/857mm without lightning rod: 23.9 inches/608mm |
Installation |
Pole mount |