Skip to content

Nova230i_TDD

Nova230i_TDD-1
Nova230i_TDD-2

Nova230i_TDD Indoor Base Station

The Nova230i is a lower power outdoor 2x500mW microcell eNodeB (eNB) specifically for tightly clustered pockets of customers, coverage holes, edges of your network, or simply opportunistic micro targeting, like RV parks, marinas, and high-density dwellings such as townhomes and apartments. As with all Baicells products, the Nova230i supports Long-Term Evolution (LTE) technology, and it operates in Time Division Duplexing (TDD) mode.

When paired with self-install indoor user equipment (UE), such customer sets can be captured quickly and with a near immediate ROI. For private network operators, this microcell is perfect for clusters of cameras, such as those used at traffic intersections, and other devices.

The product comes with a standard one-year warranty; extended warranty is available.

Nova230i_TDD Indoor Base Station Datasheet

Download

NOTE: Features can vary based on model or region.

  • Standard LTE TDD Band 48
  • GUI-based local and remote Web management
  • Suitable for private and public deployments; any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
  • Excellent Non-Line-of-Sight (NLOS) coverage
  • Peak rate: Up to DL 110Mbps and UL 35Mbps with 20MHz bandwidth
  • 32 RRC connected users
  • PoE++ power supply; only one Ethernet cable required for data transmission and power supply
  • Cloud /Local/Embedded EPC (HaloB) is supported for more convenient and economical deployment
  • Plug-and-play with Self-Organizing Network (SON) capabilities
  • Inter operation with all standard LTE Evolved Packet Core (EPC)
  • Supports TR-069 network management interface
  • Lower power consumption, which reduces OPEX, can be powered easily by Baicells compact outdoor smart UPS

Standard

LTE TDD RAN (3GPP R15 compliant)

TDD UL/DL Configuration

1, 2, 6 (with Special Subframe Configuration 7)

Frequency Band

B48 (3550 MHz – 3700 MHz)

Channel Bandwidth

5/10/15/20 MHz

Multiplexing

MIMO: 2x2 (DL)

Security

Radio: SNOW 3G/AES-128/ZUC
Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128)

Ethernet Interface

1 RJ-45 Ethernet interface (1 GE)

Power Supply

PoE++, comply with IEEE 802.3bt standard

Protocols Used

IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP

Network Management

IPv4/IPv6, HTTP/HTTPs, TR-069, SSH, Embedded EPC

VLAN/VxLAN

802.IQ/VxLAN

LED Indicators

4 x status LED

PWR/ACT/RUN/ALM

Peak Data Rate

20 MHz

DL (Mbps)

UL (Mbps)

UL/DL Config 1

80

28

UL/DL Config 2

110

14

UL/DL Config 6

65

35

10 MHz

DL (Mbps)

UL (Mbps)

UL/DL Config 1

38

14

UL/DL Config 2

52

7

UL/DL Config 6

31

17

User Capacity

Up to 32 RRC connected users per cell (4 users per TTI)

Maximum Deployment Range

7 kilometers

Latency

30 milliseconds

Receiving Sensitivity

-99.5 dBm (per channel)

Modulation

MCS0 (QPSK) to MCS28 (64QAM)

DL: QPSK, 16QAM, 64QAM

UL: QPSK, 16QAM, 64QAM

Transmit Power Range

0 to 27 dBm (combined, with 1 dB interval)

Quality of Service

Nine-level priority indicated by QoS Class Identifiers (QCI)

ARQ/HARQ

Supported

Synchronization

GPS (built-in), 1588v2

Voice

VoLTE, Circuit Switched Fallback (CSFB) to GSM

NSA

Supported

SON

Self-Organizing Network

Ÿ   Automatic setup

Ÿ   Automatic Neighbor Relation (ANR)

Ÿ   PCI confliction detection

EPC

HaloB (Embedded EPC)

Traffic Offload

Local breakout

Layer 2 Support

Transparent Bridge Mode

Maintenance

Ÿ   Local/Remote Web maintenance

Ÿ   Online status management

Ÿ   Performance statistics

Ÿ   Fault management

Ÿ   Local/Remote software upgrade

Ÿ   Logging

Ÿ   Connectivity diagnosis

Ÿ   Automatic start and configuration

Ÿ   Alarm reporting

Ÿ   User information tracing

Ÿ   Signaling trace

Power Interface Lightning Protection

Differential mode: ±3 KA
Common mode: ±5 KA

MTBF

≥ 150000 hours

MTTR

≤ 1 hour

Ingress Protection Rating

IP65

Operating Temperature

-40°F to 131°F / -40°C to 55°C

Storage Temperature

-49°F to 158°F / -45°C to 70°C

Humidity

5% to 95% RH

Atmospheric Pressure

70 kPa to 106 kPa

Power Consumption

Typical 22.5W, maximum 25W

Weight

3.42 lbs / 1.55kg

Dimensions (HxWxD)

8.7 x 5.9 x 2.05 inches

221 x 150 x 52 millimeters

Installation

Pole or wall mount