Nova230i_FDD
Nova230i_FDD Indoor Base Station
The Nova230i is a lower power outdoor 2x500mW microcell eNodeB (eNB) specifically for tightly clustered pockets of customers, coverage holes, edges of your network, or simply opportunistic micro targeting, like RV parks, marinas, and high-density dwellings such as townhomes and apartments. As with all Baicells products, the Nova230i supports Long-Term Evolution (LTE) technology, and it operates in Frequency Division Duplexing (FDD) mode.
When paired with self-install indoor user equipment (UE), such customer sets can be captured quickly and with a near immediate ROI. For private network operators, this microcell is perfect for clusters of cameras, such as those used at traffic intersections, and other devices.
The product comes with a standard one-year warranty; extended warranty is available.
Nova230i_FDD Indoor Base Station Datasheet
DownloadNOTE: Features can vary based on model or region.
- Standard LTE FDD Band 3
- GUI-based local and remote Web management
- Suitable for private and public deployments; any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
- Excellent Non-Line-of-Sight (NLOS) coverage
- Peak rate: Up to DL 150 Mbps and UL 50 Mbps with 20 MHz bandwidth
- 32 RRC connected users
- PoE++ power supply; only one Ethernet cable required for data transmission and power supply
- Cloud /Local/Embedded EPC (HaloB) is supported for more convenient and economical deployment
- Plug-and-play with Self-Organizing Network (SON) capabilities
- Inter operation with all standard LTE Evolved Packet Core (EPC)
- Supports TR-069 network management interface
- Lower power consumption, which reduces OPEX, can be powered easily by Baicells compact outdoor smart UPS
Standard |
LTE FDD RAN (3GPP R10 compliant) |
Frequency Band |
B3 (UL: 1710MHz-1785MHz, DL: 1805MHz-1880MHz) |
Channel Bandwidth |
5/10/15/20 MHz |
Multiplexing |
MIMO: 2x2 (DL) |
Security |
Radio: SNOW 3G/AES-128/ZUC |
Ethernet Interface |
1 RJ-45 Ethernet interface (1 GE) |
Power Supply |
PoE++, comply with IEEE 802.3bt standard |
Protocols Used |
IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP |
Network Management |
IPv4/IPv6, HTTP/HTTPs, TR-069, SSH, Embedded EPC |
VLAN/VxLAN |
802.IQ/VxLAN |
LED Indicators |
4 x status LED PWR/ACT/RUN/ALM |
Peak Data Rate |
20MHz: DL 150Mbps, UL 50Mbps 10MHz: DL 75Mbps, UL 25Mbps |
User Capacity |
32 RRC connected users |
Maximum Deployment Range |
5 kilometers |
Latency |
30 milliseconds |
Receive Sensitivity |
-101 dBm |
Modulation |
MCS0 (QPSK) to MCS28 (64QAM) DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM |
Transmit Power Range |
0 to 30 dBm (combined, with 1 dB interval) |
Quality of Service |
Nine-level priority indicated by QoS Class Identifiers (QCI) |
ARQ/HARQ |
Yes |
Synchronization |
GPS (built-in), 1588v2 |
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
Inter-RAT Mobility |
To GSM, UTRAN and 5G NSA/SA |
SON |
Self-Organizing Network Automatic setup Automatic Neighbor Relation (ANR) PCI confliction detection |
EPC |
HaloB (Embedded EPC) |
Traffic Offload |
Local breakout |
UL Interference Detection |
Supported |
Maintenance |
Local/Remote Web maintenance Online status management Performance statistics Fault management Local/Remote software upgrade Logging Connectivity diagnosis Automatic start and configuration Alarm reporting User information tracing |
Power Interface Lightning Protection |
Differential mode: ±10 KA |
MTBF |
≥ 150000 hours |
MTTR |
≤ 1 hour |
Ingress Protection Rating |
IP66 |
Operating Temperature |
-40°F to 131°F / -40°C to 55°C |
Storage Temperature |
-49°F to 158°F / -45°C to 70°C |
Humidity |
5% to 95% RH |
Atmospheric Pressure |
70 kPa to 106 kPa |
Power Consumption |
Typical 22.5W, maximum 30W |
Weight |
6.0 lbs / 2.7kg |
Dimensions (HxWxD) |
9.8 x 9.8 x 3.2 inches 248 x 248 x 80.5 millimeters |
Installation |
Pole or wall mount |