Neutrino224_FDD
Neutrino224_FDD Indoor Base Station
The Neutrino224 is an indoor 2x125mW picocell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Baicells products, the Neutrino224 supports Long-Term Evolution (LTE) technology, and it operates in Frequency Division Duplexing (FDD) mode.
With high capacity and easy deployment, the Neutrino224 FDD series eNB can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).
This product comes with a standard one-year warranty; an extended warranty is available.
Neutrino224_FDD Indoor Base Station Datasheet
DownloadNOTE: Features can vary based on model or region.
- Standard LTE FDD Bands 1/2/3/5/7/8
- GUI-based local and remote Web management
- Compact, all-in-one design of external antenna
- Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
- Peak rate: Up to DL 150Mbps and UL 50Mbps with 20MHz bandwidth
- 32 RRC connected users
- PoE+ power supply; only one Ethernet cable required for data transmission and power supply
- Configured out of the box to work with Baicells Cloud Core
- Inter operation with all standard LTE Evolved Packet Core (EPC)
- Lower power consumption to reduce OPEX
- Support TR-069 network management interface
Standard |
LTE FDD RAN (3GPP R10 compliant) |
Frequency Band |
B1 (UL: 1920MHz-1980MHz, DL: 2110MHz-2170MHz) B2 (UL: 1850MHz-1910MHz, DL: 1930MHz-1990MHz) B3 (UL: 1710MHz-1785MHz, DL: 1805MHz-1880MHz) B5 (UL: 824MHz-849MHz, DL: 869MHz-894MHz) B7 (UL: 2500MHz-2570MHz, DL: 2620MHz-2690MHz) B8 (UL: 880MHz-915MHz, DL: 925MHz-960MHz) |
Channel Bandwidth |
Band1/2/3/7: 5/10/15/20 MHz Band5/8: 5/10 MHz |
Multiplexing |
MIMO: 2x2 (DL) |
Security |
Radio: SNOW 3G/AES-128 |
Ethernet Interface |
One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1 GE) |
Power Supply |
12VDC, AC adaptor (multiple standards optional), PoE+, comply with IEEE 802.3at standard |
Protocols Used |
IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP |
Network Management |
IPv4/IPv6, HTTP/HTTPs, TR-069, SSH, Embedded EPC |
VLAN/VxLAN |
802.IQ/VxLAN |
LED Indicators |
1 x status LED |
Peak Data Rate |
20MHz: DL 150Mbps, UL 50Mbps 10MHz: DL 75Mbps, UL 25Mbps |
User Capacity |
32 RRC connected users |
Latency |
30 milliseconds |
Receive Sensitivity |
Band1/2/3/5/8: -101dBm Band7: -100dBm |
Modulation |
MCS0 (QPSK) to MCS28 (64QAM) DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM |
Transmit Power Range |
0 to 21 dBm per channel (combined +24dBm, configurable) (1 dB interval) |
Quality of Service |
Nine-level priority indicated by QoS Class Identifiers (QCI) |
ARQ/HARQ |
Supported |
Synchronization |
GPS, 1588v2, network listening (NL) |
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
Inter-RAT Mobility |
To GSM, UTRAN and 5G NSA/SA |
SON |
Self-Organizing Network Automatic setup Automatic Neighbor Relation (ANR) PCI confliction detection |
EPC |
HaloB (Embedded EPC) |
Traffic Offload |
Local breakout |
UL Interference Detection |
Supported |
Maintenance |
Local/Remote Web maintenance Online status management Performance statistics Fault management Local/Remote software upgrade Logging Connectivity diagnosis Automatic start and configuration Alarm reporting User information tracing |
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Operating Temperature |
23°F to 113°F / -5°C to 45°C |
|
Storage Temperature |
14°F to 122°F / -10°C to 50°C |
|
Humidity |
5% to 95% RH |
|
Power Consumption |
Typical 11.25W, maximum 15W |
|
Weight |
1.0 lbs / 455g |
|
Dimensions (HxWxD) |
Flat antenna:
Vertical antenna: |
11.9 x 6.9 x 1.2 inches 301.6 x 175 x 30.5 millimeters 5.8 x 6.9 x 7.1 inches 146.5 x 175 x 180.4 millimeters |
Installation |
Ceiling or wall mount, or desktop |