Neutrino220
Neutrino220 Indoor Base Station
The Neutrino220 is an indoor 2x50mW microcell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Baicells products, the Neutrino220 supports Long-Term Evolution (LTE) technology, and it operates in Frequency Division Duplexing (FDD) and Time Division Duplexing (TDD) mode.
With high capacity and easy deployment, the Neutrino220 series eNB can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).
This product comes with a standard one-year warranty; an extended warranty is available.
Neutrino220 Indoor Base Station Datasheet
DownloadNOTE: Features can vary based on model or region.
- Standard LTE TDD/FDD Bands 1/3/5/40
- GUI-based local and remote Web management
- Compact, all-in-one design of internal antenna
- Support 1588v2 and Network Listening (NL) synchronization
- Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security (IPsec)
- Peak rate: Up to DL 110Mbps and UL 10Mbps with 20MHz bandwidth in LTE TDD mode
- Peak rate: Up to DL 150Mbps and UL 50Mbps with 20MHz bandwidth in LTE FDD mode
- 32 RRC connected users
- Configured out of the box to work with Baicells Cloud Core
- Inter operation with all standard LTE Evolved Packet Core (EPC)
- Lower power consumption to reduce OPEX
- Support TR-069 network management interface
Standard |
LTE TDD/FDD RAN (3GPP R10 compliant) |
TDD UL/DL Configuration |
1, 2 (with Special Subframe Configuration 7) |
Frequency Band |
FDD: B1 (UL: 1920MHz-1980MHz, DL: 2110MHz-2170MHz) B3 (UL: 1710MHz-1785MHz, DL: 1805MHz-1880MHz) B5 (UL: 824MHz-849MHz, DL: 869MHz-894MHz) TDD: B40 (2300MHz – 2400MHz) |
Channel Bandwidth |
Band1/3/40: 5/10/15/20 MHz Band5: 5/10 MHz |
Multiplexing |
MIMO: 2x2 (DL) |
Security |
Radio: SNOW 3G/AES-128 |
Ethernet Interface |
One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1 GE) |
Power Supply |
12VDC, AC adaptor (multiple standards optional) |
Protocols Used |
IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP |
Network Management |
IPv4/IPv6, HTTP/HTTPs, TR-069, SSH, Embedded EPC |
VLAN/VxLAN |
802.IQ/VxLAN |
LED Indicators |
3 x status LED PWR/LTE/ALM |
Peak Data Rate – TDD mode |
20MHz:
10MHz: |
SA1: DL 80Mbps, UL 20Mbps SA2: DL 110Mbps, UL 10Mbps SA1: DL 40Mbps, UL 7Mbps SA2: DL 55Mbps, UL 5Mbps |
Peak Data Rate – FDD mode |
20MHz: DL 150Mbps, UL 50Mbps 10MHz: DL 75Mbps, UL 25Mbps |
|
User Capacity |
32 RRC connected users |
|
Latency |
30 milliseconds |
|
Receive Sensitivity |
-100dBm |
|
Modulation |
MCS0 (QPSK) to MCS28 (64QAM) DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM |
|
Transmit Power Range |
0 to 20 dBm (combined, with 1 dB interval) |
|
Quality of Service |
Nine-level priority indicated by QoS Class Identifiers (QCI) |
|
ARQ/HARQ |
Supported |
|
Synchronization |
1588v2, Network Listening (NL) |
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
Inter-RAT Mobility |
To GSM, UTRAN and 5G NSA/SA |
SON |
Self-Organizing Network Automatic setup Automatic Neighbor Relation (ANR) PCI confliction detection |
EPC |
HaloB (Embedded EPC) |
Traffic Offload |
Local breakout |
UL Interference Detection |
Supported |
Maintenance |
Local/Remote Web maintenance Online status management Performance statistics Fault management Local/Remote software upgrade Logging Connectivity diagnosis Automatic start and configuration Alarm reporting User information tracing |
MTBF |
≥ 150000 hours |
MTTR |
≤ 1 hour |
Operating Temperature |
23°F to 113°F / -5°C to 45°C |
Storage Temperature |
14°F to 122°F / -10°C to 50°C |
Humidity |
5% to 95% RH |
Power Consumption |
Typical 9W, maximum 12W |
Weight |
0.9 lbs / 410g |
Dimensions (HxWxD) |
5.5 x 7.1 x 1.9 inches 140 x 180 x 47.5 millimeters |
Installation |
Desktop |