Aurora6449m
Aurora6449m mmW Outdoor Base Station
The Baicells Aurora6449m mmW is an advanced outdoor millimeter wave integrated base station (gNB), which is designed and developed based on Qualcomm 5G SoC solution. This 49dBm EIRP gNB is low power consumption, subminiature and easy to maintenance.
This product helps operators to enhance the coverage performance of 5G networks effectively, improve the capacity of 5G networks and eliminate the blind district, meanwhile it also can help to reduce the system power consumption.
Aurora6449m mmW Outdoor Base Station Datasheet
DownloadNOTE: Features can vary based on model or region.
- Standard NR Band n257, n258 partially, n261
- 5G-NR TDD (3GPP R16 compliant)
- GUI-based local and remote Web management
- Supports up to 4x100MHz bandwidth
- Peak data rate: DL:2Gbps@4CC, UL:140Mbps@2CC (DDDSU)
- Supports 600 RRC connected UEs
- Supports PDU session setting
- Supports cell setting
- Supports Stand Alone (SA) mode: FR2 only, NRDC*
- Supports Non Stand Alone (NSA) mode: ENDC*
- Supports SCTP control (IKE SCTP)
- All In One (AIO) small cell form factor for quick and easy installation
- Highly secured with equipment certification against potential intrusion risk
- Supports TR-069 network management interface
- Lower power consumption, which reduces OPEX, can be powered easily by Baicells compact indoor smart UPS
Standard |
5G NR TDD (3GPP R16 compliant) |
TDD UL/DL Configuration |
5ms periodicity (μ=1): DDDSU |
Frequency Band |
n257 (26.5GHz ~ 29.5GHz) n258 (26.5GHz ~ 27.5GHz) n261 (27.5GHz ~ 28.35GHz) |
Channel Bandwidth |
100MHz x 4CC |
Multiplexing |
DL:2, UL:1 |
Security |
Radio: SNOW 3G/AES-128 |
Ethernet Interface |
1 optical (10G SFP+) and 1 RJ-45 Ethernet interface (1 GE) |
Power Supply |
-40VDC to -57VDC, nominal -48VDC (optional 90VAC ~ 264VAC, nominal voltage 110/220VAC) |
Protocols Used |
IPv4/v6, UDP, TCP, ICMP, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, DHCP |
Network Management |
IPv4/v6, HTTP/HTTPs, TR-069, SSH, Embedded 5GC* |
VLAN/VxLAN* |
802.IQ/VxLAN |
LED Indicators |
4 x status LED PWR/ACT/RUN/ALM |
Antenna |
64 dual-polarized antenna elements, built-in with Maximum +/-60 degrees |
GPS Antenna |
External GPS antenna, N-Type connector |
Peak Data Rate |
100 MHz |
DL (Mbps) |
UL (Mbps) |
5ms periodicity |
2000 |
140 |
|
User Capacity |
600 RRC connected users |
||
Latency |
<10 milliseconds |
||
Receive Sensitivity |
-105 dBm EIRP(per polarization) |
||
Modulation |
UL: MCS0 (QPSK) to MCS28 (64QAM) DL: MCS0 (QPSK) to MCS27 (64QAM) |
||
Transmit Power Range |
n257, n258, n261: 49dBm EIRP Max. (H+V polarization) @ boresight beam |
||
Quality of Service |
Complied with 3GPP standard 5G QoS Identifier (5QI) |
||
ARQ/HARQ |
Supported |
||
Synchronization |
GPS and IEEE1588V2 slave |
Voice |
VoNR/EPSFB |
SON |
Self-Organizing Network Automatic Neighbor Relation (ANR) PCI confliction detection |
Traffic Offload |
Local breakout |
Maintenance |
Local/Remote Web maintenance Online status management Performance statistics Fault management Local/Remote software upgrade Logging Connectivity diagnosis Auto startup |
Surge Suppression |
Network interface: 1KV Power Interface: Differential mode: 2KA; Common mode: 4KA |
Lightning Protection |
Power Interface: Differential mode: ±10 KA; Common mode: ±20 KA |
MTBF |
≥ 150000 hours |
MTTR |
≤ 1 hour |
Ingress Protection Rating |
IP65 |
Operating Temperature |
-30°C to 50°C |
Storage Temperature |
-40°C to 65°C |
Humidity |
2% to 95% RH |
Atmospheric Pressure |
70 kPa to 106 kPa |
Power Consumption |
Typical 100W, Maximum 120W |
Weight |
Without bracket: 11.5 lbs/5.2kg With bracket: 12.3 lbs/5.6kg |
Dimensions (HxWxD) |
12.2 x 9.4 x 3.5 inches 310 X 240 X 88 millimeters |
Installation |
Pole or wall mount |