Skip to content

AtomOD15G-HP Outdoor CPE

AtomOD15G-HP-1
AtomOD15G-HP-2
AtomOD15G-HP-3

AtomOD15G-HP Outdoor CPE

The Baicells Atom OD15G-HP Outdoor High-Gain CPE provides superior performance and routing capabilities to bring end-user broadband data and voice services. It operates on standard LTE TDD, supports multiple bands, and complies with 3GPP Release 12 CAT15 standards.

The Atom OD15G-HP is available in two variants: The CAT-B CBSD, which requires SAS connectivity and CPI certification, and the EUD, which does not require SAS connectivity or CPI certification.

The CPE design incorporates UL 2x2 and DL 4x4 MIMO and RX diversity, enabling improved cell coverage and high-speed wireless communications. The CPE supports the High-Power User Equipment (HPUE) feature; the maximum transmit power can reach up to 30 dBm. It also supports Carrier Aggregation (CA), which extends bandwidth, increases data rates, and improves overall network performance.

The product has a standard one-year warranty; an extended warranty is available.

AtomOD15G-HP Outdoor CPE Datasheet

Download

NOTE: Features can vary based on model or region.

  • Supports LTE TDD Bands 41/42/43/48
  • Customization can be requested:
  • Complies with 3GPP Release 12 CAT15 standards
  • 1000 Mbps Ethernet interface
  • Peak data rate of up to DL 580 Mbps and UL 70 Mbps
  • Supports HPUE feature; maximum TX Power can reach up to 30 dBm
  • 256 QAM for DL and 64 QAM for UL as the highest order modulation formats
  • Built-in LTE directional antenna for 2T4R diversity
  • Built-in GPS for self-positioning
  • Power supply with Passive PoE
  • GUI-based local and remote Web management
  • Supports TR-069 network management protocol
  • Cell lock, SIM lock, and pin lock
  • User-friendly LED status indicators
  • Pole or wall mounted
  • Wi-Fi assisted alignment
  • CBRS EUD variant is available
  • Transparent Bridge Mode (L2 Support)

LTE Standard

3GPP Release12, CAT15

LTE Mode

TDD

Channel Bandwidth

SC: 5/10/15/20 MHz

CA: 80 MHz as maximum aggregated bandwidth

Frequency Bands

B41 (2496 MHz–2690 MHz)

B42 (3400 MHz–3600 MHz)

B43 (3600 MHz–3800 MHz)

B48 (3550 MHz–3700 MHz)

Multiplexing

DL 4x4 MIMO, UL 2x2 MIMO

Security

Firewall: IP/MAC/URL filter; ACL rule

Ethernet Interface

1 RJ-45 port 10/100/1000 auto-sensing, auto-MDX, Passive PoE

Power Supply

24 V/48 VDC Passive PoE Injector

Protocols Used

IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR069, CBSD

Network Management

Web GUI, ACS, OMC, SNMP

VLAN

802.1Q

Peak Data Rate (LTE)

4x20 MHz (CA)

DL (2x2 MIMO, 256 QAM)

UL (64 QAM,

2x20 MHz only)

TDD UL/DL Config. 1

420 Mbps

60 Mbps

TDD UL/DL Config. 2

580 Mbps

30 Mbps

TDD UL/DL Config. 6

340 Mbps

70 Mbps

2x20 MHz (CA)

DL (4x4 MIMO, 64 QAM)

UL (64 QAM)

TDD UL/DL Config. 1

320 Mbps

60 Mbps

TDD UL/DL Config. 2

440 Mbps

30 Mbps

TDD UL/DL Config. 6

170 Mbps

70 Mbps

Modulation

DL: QPSK, 16 QAM, 64 QAM, 256 QAM

UL: QPSK, 16 QAM, 64 QAM

Carrier Aggregation

DL Contiguous and Non-contiguous 2CA/3CA/4CA (2x2 MIMO)

DL Contiguous and Non-contiguous 2CA (4x4 MIMO)

UL: Contiguous and Non-contiguous 2CA (SISO)

Receive Sensitivity

-96 ± 2 dBm @ QPSK, 20 MHz, 25°C, -102 ± 2 dBm @ 4RX Diversity

Network Mode

NAT or Bridge

SIM

PIN management, SIM lock

Network Connection

Auto or manual

LTE Scan Mode

Full band scan or frequency lock

VPN

L2TP L2/L3, GRE L2/L3

NAT

Port forwarding, port trigger, DMZ, ALG

Diagnostics

TCP dump, ping, traceroute

Statistics

LTE status; connection/system uptime; device status; DHCP client list; Wi-Fi station list; firewall status

Maintenance

Date and time setting; reboot; restore factory settings; restore or back up configuration file; firmware upgrade locally or OTA

Positioning

GPS (built-in)

CBRS

Automatic installation of CBSD certificate*

GPS Antenna

External GPS antenna, N-Type connector (TBC)

Antenna Type

Internal directional, 2T4R

Antenna Gain

M11: 18 dBi

M11-EUD: 18 dBi

Max Transmit Power

M11: 30 dBm (combined, to regional EIRP limit)

M11-EUD: 5 dBm (combined, to regional EIRP limit)

Maximum EIRP

M11: 48 dBm

M11-EUD: 23 dBm

PHYSICAL

IP Protection Rating

IP66

LED Indicators

PWR, LTE, LTE Signal

USIM

1.8 V/3 V 2FF

Restore Button

Press for 10 seconds to restore the UE to its factory settings

Temperature

Ÿ Operating Temperature: -40°F to 131°F / -40°C to 55°C

Ÿ Storage Temperature: -40°F to 158°F / -40°C to 70°C

Humidity

5%–95%

Power Consumption

<10 W

Power Supply

With PoE Adaptor:

INPUT 100-240 VAC

OUTPUT 24 VDC 0.5 A

Weight

About 7.3 lb/3.47 kg

Dimensions

14.5 x 14.5 x 2.9 inches / 368 x 368 x 74 millimeters

Wi-Fi alignment SPECIFICATIONS

Standard

IEEE 802.11b/g/n

Channel Bandwidth

20/40 MHz

Frequency

2.4 GHz

MIMO

1x1

Peak Rate

802.11b: 11 Mbps

802.11g: 54 Mbps

802.11n: 150 Mbps

Modulation

DSSS/CCK, OFDM

Receive Sensitivity

-64 dBm @ 65 Mbps, typical for 802.11n

-65 dBm @ 54 Mbps, typical for 802.11g

-76 dBm @ 11 Mbps, typical for 802.11b

Max Output Power

10 ± 3 dBm

Antenna Type

Internal omni, 1T1R

Antenna Gain

<1 dBi