Skip to content

AtomID15M-HP Indoor CPE

AtomID15M-HP -1
AtomID15M-HP -2
AtomID15M-HP -3
AtomID15M-HP -4

AtomID15M-HP Indoor CPE

The Baicells Atom ID15M-HP Indoor Customer Premise Equipment (CPE) provides superior performance and routing capabilities to bring broadband data services to end-users.

The Atom ID15M-HP has an embedded Wi-Fi Access Point (AP), operates on standard LTE TDD, supports multiple bands, and complies with 3GPP Release 12 CAT15 standards. Wireless and wired devices, including mobile phones, laptops, tablets, and other smart devices, can simultaneously access the CPE.

The Atom ID15M-HP is available in two variants: The CAT-B CBSD, which requires SAS connectivity and CPI certification, and the EUD, which does not require SAS connectivity or CPI certification.

The CPE design incorporates UL 2x2 and DL 4x4 MIMO and RX diversity, enabling improved cell coverage and high-speed wireless communications. It also supports Carrier Aggregation (CA), which extends bandwidth, increases data rates, and improves overall network performance.

The product has a standard one-year warranty; an extended warranty is available.

AtomID15M-HP Indoor CPE Datasheet

Download

NOTE: Features can vary based on model or region.

  • Supports LTE Bands 41/42/43/48
    • Customization can be requested:
    • Complies with 3GPP Release 12 CAT15 standards
    • Supports Inter/Intra-Bands 4CA
    • Supports HPUE Maximum TX Power 30 dBm
    • Supports Wi-Fi 6 5 GHz and 3.5 GHz
    • 1000 Mbps Ethernet interface
    • Peak data rate of up to DL 580 Mbps
    • Peak data rate of up to UL 80 Mbps
    • 256 QAM for DL and 64 QAM for UL as the highest order modulation formats
    • GUI-based local and remote Web management
    • Excellent Non-Line-of-Sight (NLOS) coverage
    • Supports TR-069 network management interface protocol
    • Cell lock, SIM lock, and pin lock
    • User-friendly LED status indicators
    • Supports Bluetooth 2 and ZigBee protocols for Internet of Things (IoT)*
    • Supports Transparent Bridge Mode
      (      L2 Support)
    • Compatible with Alexa*
    • Compatible with EasyMesh*

* Planned for future release

LTE Standard

3GPP Release 12, CAT15

LTE Mode

TDD

Channel Bandwidth

SC: 5/10/15/20 MHz

CA: 80 MHz as maximum aggregated bandwidth

Frequency Bands

B41 (2496 MHz–2690 MHz)
B42 (3400 MHz–3600 MHz)
B43 (3600 MHz–3800 MHz)
B48 (3550 MHz–3700 MHz)

Multiplexing

DL 4x4 MIMO, UL 2x2 MIMO

Security

Firewall: IP/MAC/URL filter; ACL rule

Ethernet Interface

3 RJ-45 port 10/100/1000 auto-sensing, auto-MDX

Protocols Used

IPv4/IPv6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR-069, CBSD

Network Management

Web GUI, ACS, OMC, SNMP

VLAN

802.1Q

Peak Rate

4x20 MHz (CA)

DL (Mbps)

2x2 MIMO, 256 QAM

UL (Mbps)

64 QAM

UL/DL Config 1

420

60

UL/DL Config 2

580

30

UL/DL Config 6

260

80

2x20 MHz (CA)

DL (Mbps)

4x4 MIMO, 64 QAM

UL (Mbps)

64 QAM

UL/DL Config 1

320

60

UL/DL Config 2

440

30

UL/DL Config 6

198

80

Modulation

DL: QPSK, 16 QAM, 64 QAM, 256 QAM

UL: QPSK, 16 QAM, 64 QAM

Receive Sensitivity

-96 ± 2 dBm @ QPSK, 20 MHz, 25°C, -102 ± 2 dBm @ 4RX Diversity

Network Mode

NAT or Bridge

SIM

PIN management, SIM lock

Network Connection

Auto or manual

LTE Scan Mode

Full band scan or frequency lock

WLAN

MSSID isolation

VPN

L2TP L2/L3, GRE L2/L3

NAT

Port forwarding, port trigger, DMZ, ALG

Diagnostics

TCP dump, ping, traceroute

Statistics

LTE status; connection/system uptime; device status; DHCP client list; Wi-Fi station list; firewall status

Maintenance

Date and time setting; reboot; restore factory settings; restore or back up configuration file; firmware upgrade locally or OTA

Standard

IEEE 802.11b/g/n/ac/ax

Channel Bandwidth

20 MHz, 40 MHz, 80 MHz

Frequency

2.4 GHz, 5 GHz

MIMO

2x2

Peak Rate

·    802.11b: 11 Mbps

·    802.11g: 54 Mbps

·    802.11n: 300 Mbps

·    802.11ac: 866 Mbps

·    802.11ax 5 GHz: 1200 Mbps

·    802.11ax 2.4 GHz: 574 Mbps

Modulation

DSSS/CCK, OFDM

Sensitivity

•  802.11b BW20: -99.5 dBm (1 M), -91 dBm (11 M)

·    802.11g BW20: -96 dBm (6 M), -78 dBm (54 M)

·    802.11n: HT20: -95.5 dBm (MCS0), -75 dBm (MCS7)

·    802.11n: HT40: -93 dBm (MCS0), -72 dBm (MCS7)

·    802.11ac: VHT20: -95.5 dBm (MCS0), -71 dBm (MCS9)

·    802.11ac: VHT40: -93 dBm (MCS0), -69 dBm (MCS9)

·    802.11ax: HE20: -95.5 dBm (MCS0), -65.5 dBm (MCS11)

·    802.11ax: HE40: -93 dBm (MCS0), -63 dBm (MCS11)

Max Output Power

23.5 dBm

Antenna Type

Internal omni, 2T2R

Antenna Gain

3 dBi to 5 dBi

Active Users

128

PHYSICAL

LED Indicators

Power, WLAN, LTE, LTE Signal

USIM

1.8 V/3 V 4FF (nano)

Restore Button

Press for 10 seconds to restore the CPE to its factory settings

WPS Button

Press for WPS or EasyMesh configuration

Power Switch

Push 1.5 seconds for ON/OFF

Temperature

·    Operating Temperature: 14°F to 113°F / -10°C to 45°C

·    Storage Temperature: -4°F to 158°F / -20°C to 70°C

Humidity

5% to 95%

Power Consumption

<20 W

Power Supply

With DC Adaptor:

·    INPUT 100–240 VAC

·    OUTPUT 12 VDC 2 A

Weight

1.98 lb/.9 kg

Dimensions (HxWxD)

3.9 x 4.3 x 9.6 inches, 100 x 110 x 245 millimeters